Posts Tagged ‘wood bowl’


Woodturn A Mixed Open & Closed Segmented Bowl

I made this segmented oak bowl for neighbors who recently moved away. The wood came from leftovers that they had stored in their crawlspace. I wanted them to have something from the house to remember their home and the neighborhood. The bowl is oak; 7 rings: 6 closed segment rings of 12 segments each, and […]

Read More...

Segmented Woodturning To Fix My Mother’s Old Stone Clock

Sometimes the best project is a simple project to help someone else in a small but critical way. This is the case with this project. My mother has a sentimental attachment to a stone clock that her brother in law made for her many, many years ago. Unfortunately the clock stopped working. Testing revealed that […]

Read More...

Woodturning A Crazy Droopy Segmented Bowl

While at the Utah Woodturning Symposium I picked up a book about Ray Allen showing his segmented work. It was inspiring and inspired this project. Normally, segment rings must have perfectly parallel faces or else the bowl looks weird. In this case, I want the bowl to look weird — the rings are deliberately not […]

Read More...

Home Made Cole Jaws For Woodturning Large Bowls

I’ve needed a set of large chuck jaws to remount bowls in order to turn their bases. I’ve used jamb chucks successfully but want to expand my options but not pay the high price of commercial cole jaws. So, I’ve made my own 17″ wood jaws to fit my vicmark chuck. Steps: Cut plywood to the size desired. […]

Read More...

Reverse Chuck And Finish A Green Turned Bowl

While waiting for my recent wet walnut bowl to dry, I decided to actually finish another one I rough turned several years ago. (It did not really need that long to dry). This bowl I held between a closed chuck and the tailstock to refine the mounting tenon and then to re-turn the exterior. While […]

Read More...

Turn A Common Wood Stud Into A Segmented Bowl

Summers Woodworking issued a challenge: Make something nice from an ordinary 2x4x8 stud. I couldn’t resist. For me, that means it would have to be round. But how to turn a 2×4 into something both round and nice? Hmmm. So I decided to make a large segmented bowl, using almost all of the 2×4. I’m […]

Read More...

Woodturning An Easter Bowl Without A 4-Jaw Chuck

A little while ago, a viewer asked how he could turn a bowl without a chuck. He has a nice piece of wood and a new lathe but does not own a chuck. For many years now, I’ve consistently used a chuck when turning bowls. As it turns out, I recently purchased a mini lathe […]

Read More...

Woodturning A Pot O’ Gold Bowl For Leprechaun Gold

For St. Patrick’s Day, I need a pot for the leprechauns to leave me a little of their gold. Fortunately, at a recent club meeting, Nick Stagg demo his bowl turning techniques. And even more, he gave me a big block of ash that he had used as a jam chuck. However, in my haste […]

Read More...

Green Turn and Remount A Natural Edge Wood Bowl

A year ago, a limb of a maple tree fell on a friend’s home in a storm. He gave me some of the wood for woodturning. From the wood, I turned two natural edge bowls. The first bowl I turned all at once, finished it, then let it dry. I posted its video  then.   […]

Read More...

Petite Square Bowl in Cherry

This woodturning project is a petite square bowl in cherry. It was based by a demonstration by Eli Avisera. The blank is 5″ square, 3/4″ thick, finished with semi-gloss lacquer. The challenge with a square bowl are the corners. The corners appear as shadows; it is hard to know exactly where to start cutting with […]

Read More...