May also be viewed on YouTube. At my wife’s request, I turned this magnetic pin bowl. It looks simple but figuring out how to embed a magnet and still have enough magnetic force was a brain teaser. The bowl is walnut finished with friction polish. It uses a segmented approach with four rings of twelve […]
Read More...May also be viewed via YouTube. I rough turned this bowl about two years ago. A friend was cutting down a tree in his yard and offered me some of the wood. He called it a golden chain. I looked up the tree and found several interesting facts including: it is very hard; sometimes used […]
Read More...May also be viewed on YouTube. This bud vase is spalted birch harvested about a year ago. It is an eccentric turning on four axes: Main and offset by 3/8 inch at 120 degree intervals. A year ago, I rough turned it round and waxed it. It has been laying around my shop since then. […]
Read More...May also be viewed on YouTube. After visiting the Portland Saturday Market, I was inspired to turn this winged tealight. As I turned it, I was struck by the similarities between this winged bowl design and a natural edge turning. After all, except for dealing with the bark, the process is the same and the […]
Read More...May also be viewed on YouTube – but please stay here if possible. To complete my video series on wood scoops, I turned this cedar scoop about 7 inches long and 2 inches diameter, finished with beeswax and mineral oil. The turning axes were: The original center of the wood for the scoop. A skewed […]
Read More...May also be viewed on YouTube. This scoop is actually my Vicmark vm120 body with wood jaws mounted to the body. The jaws are made from an 8″ by 8″ by 1/2″ piece of Baltic birch plywood(the good stuff). The standard jaws were used as templates to mark bolt holes. The holes were then counter […]
Read More...May also be viewed on YouTube. This scoop is another style I saw Soren Berger turn recently. The difference is the oval bowl that makes the scoop more difficult to hold while hollowing the bowl. I wanted a better way to hold the wood than a jamb chuck or a scroll chuck. Jamb chucks require […]
Read More...May also be viewed in YouTube. I made this segmented bowl in preparation for a segmented turning demo at Williamette Woodturners. Bryan wanted an introduction to segmented turning with a hat theme. The introduction included both open and closed segmented process to create this bowl. In response, we selected a bowler had with both closed […]
Read More...May also be viewed on YouTube. Recently, I saw Sören Berger turn a scoop. He made it look easy and indeed it is — after you’ve completed one. This cedar scoop combines elements of spindle turning, multi-axis turning, and bowl turning. It also includes turning a perfect sphere. A perfect sphere is no problem for […]
Read More...May also be viewed on YouTube. This journey thru Celtic knots has resulted in an easy and repeatable process that greatly simplifies preparation of the turning stock. In previous descriptions, the project wood had to be milled to exact dimensions: squares for four loops being the easiest, triangles for three loop, pentagons for five loops. […]
Read More...