This Christmas Ornament is woodturned walnut and maple about 6″ high and 4.5″ in diameter. The walnut body and maple finials are finished with friction polish. The ornament has a handmade brass hanger. The Star of Bethlehem represents the sign given for the birth of Jesus Christ, the true center of Christmas. The challenge with […]
Read More...This woodturning is made of maple poplar about 4″ tall and 2″ in diameter. The poplar bell is finished with acrylic paint for an antique look. The maple finial is finished with shellac. The ornament has a handmade brass hanger. Instead of being turned inside out, the center shape was drilled out with forstner bits. Small bits […]
Read More...This woodturning is made of apricot about 5″ tall and 1 1/2″ in diameter. The tree branches are painted with acrylic paint. The entire tree is finished with lacquer. The ornament has a handmade brass hanger. The branches were turned off axis. Three additional centers were marked on the base at 60 degree angles and about 3/8″ […]
Read More...This woodturning is made of poplar and maple. The body is 2″ poplar dyed red and finished with lacquer. The finials are maple finished with friction polish. Inside the ornament body is a cute little Christmas tree. The ornament has a handmade brass hanger. The interior of the body was drilled with a 1 1/8″ […]
Read More...This woodturning is a set of three exotic wood icicles ranging from 3 inches to 4 1/2 inches in length. Each as a finial at the bottom and a series of other shapes above the finial. They are strung on nylon thread and have a handmade brass hanger. Each as a variety of woods that […]
Read More...This woodturning resembles the space station on Star Trek – Deep Space Nine. It has a wide, round main section with corridors back to the central hub. The top and bottom finials house docking bays and equipment not subject to gravity. Each is about 7” tall and 3” in diameter. It is about 7″ tall and […]
Read More...This woodturning has a sea urchin shell on an apricot top and bottom finial. It is about 8 1/2″ tall. The shell is about 2″ in diameter. The apricot from urban forestry is finished with a friction polish. The sea urchin shell is protected by three coats of white glue on its inside. I sanded […]
Read More...This woodturning is a bronze wire inlaid Christmas ornament made of aspen and walnut finished with shellac. The body is a near sphere. It is solid – not hollowed out except for a 1/2″ hole thru the center. It weighs in at about one ounce. The turning blank is salvaged from an off cut from a green […]
Read More...This woodturning is a Christmas bell turned inside out. It proved to be a challenge to both visualize and to execute. It’s made of apricot finished with shellac. An inside out turning is assembled from strips of wood. These are temporarily glued together and turned to form the inner shape and finished. Then the strips […]
Read More...This woodturning is a nice snow gentleman dressed for the winter season. He’s made of hard maple with a walnut hat and yarn scarf. His belt is a burn. Overall, he’s coated in mineral oil and beeswax. He will be part of a Christmas Ornament Challenge.
Read More...