Woodturning Drunken Segmented Vase

Maple Walnut Vase

This post is best viewed right here on this page. In case of system difficulties, it is also posted on YouTube and FaceBook.

For this project, I am inspired by a weird segmented vase I turned several years ago. In that case, I sawed completed segmented rings at an angle. Then glued the rings into a vase. A great idea except that gluing sloping rings together was an exercise in frustration as they slid around on each other. Needless to say, I was not anxious to repeat that experience.

However, for this project, I borrow from the remote demonstration course I teach clubs for perfect Celtic knots. No. This is not a Celtic knot but it uses many of the same processes.

I built the vase ring by ring. However, not all at once. As I had enough height, I cut in a walnut ring. Then after adding more maple rings, cut in another walnut ring. Then again.

By building the vase gradually, I was able to turn the inside while each portion was still shallow (to the tool rest).

Also, the base is segmented and reinforced with a fiberglass layer.

The vase has 9 rings of maple and 3 rings of walnut. Each ring has 8 segments. This totals 96 segments, not counting those sliced in two portions with walnut passing between.

The vase is finished with walnut oil. It is a little over 3 inches diameter and 6 inches tall.

For more details on creating segmented rings, please see Simpler, Easier, Self-Correcting Process To Create Segment Rings last week.

Enjoy!


2 Responses to “Woodturning Drunken Segmented Vase”

  1. Richard Lowman says:

    Interesting concept. Love segmenting projects. Have you made a video on building your bandsaw slicing jig?? Please let me know. Very interested.
    Thank you for all you do.
    Richard L