Build Your Own Infinite Axis Chuck
This post is best viewed right here on this page. But, in case of difficulty, it is also posted on YouTube and FaceBook.
Let us build your own Infinite Axis Chuck.
Here are useful links for supplemental information.
Where to purchase the PVC fitting.
- My Etsy Store – https://www.etsy.com/shop/AsWoodTurnsTools – while supplies last
- Big Box and Plumbing Suppliers such as https://www.supplyhouse.com/PVC-Schedule-40-Fittings-14952000
Threaded Wood Faceplates
- Five Options For Woodturning Lathe Faceplates
- Easy Wood Faceplates For Woodturning
- Pin Face Plate and Threaded Wood Face Plates For Woodturning
Hand cut Spheres
- Woodturning Perfect Spheres – For Wise Turners
- How To Turn Perfect Hollow Sphere – No Jig
- Woodturning – Adjustable Sphere Tower
Project Videos
- Beyond Ordinary Eccentric Woodturning – Infinite Axes
- Woodturning Valentine’s Box With Infinite Axis Chuck
- Woodturning Christmas Ornament Using Infinite Axis Chuck
- Eccentric Bottle Stopper With Infinite Axis Chuck
- Woodturning Eccentric Twig Vase With Infinite Axis Chuck
- Eccentric Spindle Woodturning With Infinite Axis Chuck
- Woodturning Jewelry With Infinite Axis Chuck
Related:
- Eccentric Woodturning Off Axis Necklace Pendant
- Eccentric Woodturning Off Axis Medallions
- Eccentric Woodturning Necklace Centered Inserts
The Infinite Axis Chuck works in harmony with another shop-made chuck based on “Build A Shopmade Chuck For Offset Turnings” by David Mueller. American Woodturner February 2015. I have adapted this chuck to have exchangeable work platforms that interchange with this Infinite Axis Chuck. The eccentric chuck article is available to read or download from
- https://kawarthawoodturners.ca/wp-content/uploads/2018/10/Shopmade-Jig-AW3001p35-40.pdf
courtesy of Kawartha Woodturners.
When using the Infinite Axis chuck, the turning axes are NOT parallel. In space, they may never meet. They almost meet the definition of a skew axis.
Turning went much easier with a couple more accessories:
- 2 screw chucks (3/8″) for direct mount of the work platform to the lathe spindle.
- Flat faced faceplate sized for target diameter also used to press double sided tape bonding.
- Live center with #2 Morse taper and 1 1/4 x 8 tpi.
- Spindle adapter 1″x8 tpi female to 1.25″x8tpi male to adapt the live center from 1″ to 1.25″
- Large adjustable pliers or Oil Filter wrench or spanner
Enjoy!